1. Overall Dimension |
1 | Overall length(with bucket on ground) | 5835(mm) |
2 | Overall width(at stabilizer ) | 2240(mm) |
3 | Width(to outside tyre) | 1993(front wheel) 2057(mm)(rear wheel) |
4 | Width of load Bucket | 2313(mm) |
5 | Height of cab | 2720 (mm) |
6 | Height(To the top of the digging pole) | 3548 (mm) |
7 | Wheelbase | 2155.5(mm) |
8 | Back wheel Tread | 1700(mm) |
9 | Fore wheel Tread | 1880(mm) |
10 | Min. ground clearance | 275(mm) for 4WD |
11 | Tail ground clearance | 350(stabilizer) 520(center) |
12 | Traveling speed(Km/h),4 forward and 4 reverse |
| (1) Ⅰ gear forward/reverse | 6/6 |
(2) Ⅱ gear forward/reverse | 9.6/9.6 |
(3) Ⅲ gear forward/reverse | 20.5/20.5 |
(4) IV gear forward/reverse | 38/38 |
2.Main Loading Technical Specification |
1 | Rated load | 1700(Kg) |
2 | Operating weight | 8000 Kg |
3 | Rated Lifting capability of loading bucket | >34KN |
4 | Capacity of load bucket | 1.0(m3) |
5 | Max. breakout force | >49kN(arm)60(bucket) |
6 | Max. dump clearance | 2714(mm) |
7 | Max. Dump reach | 845(mm) |
8 | Dumping angle at full height | 43.5º |
9 | tilting angle of bucket | On ground position | 41° |
In the transportation position | 41.7°(350) |
10 | Max.digging depth(with bucket bottom horizontal) | 80mm |
11 | Min. turning radius | 4380mm |
12 | Lifting time of loading bucket | ≤4.5(sec.) |
13 | Lowering time of loading bucket | ≤3.5(sec.) |
14 | Dumping time | ≤1.5(sec.) |
3.Main Digging Technical Specification |
1 | Rated digging bucket capacity | 0.2(m3) |
2 | Max. digging depth | 4405(mm) |
3 | Max. digging force | >56.1+10%kN |
4 | Max. digging radius | 5390(mm) |
5 | Max. dumping height | 3510(mm) |
6 | Central offset | 550mm |
7 | Swing angle | 1800 |
8 | Max. rollback angle of digging bucket | 2010 |
4.Diesel engine |
1 | Model | Original imported Cummins B4.5 |
2 | Type | Direct injection. Turbocharged. Water cooling |
3 | Rated output | 74 kW / 99HP |
4 | Rated speed | 2200rpm |
5 | Total exhaust of cylinder | 4.5(L) |
6 | Inter-bore of cylinder/stroke | 102/138(mm) |
7 | Voltage of starting motor | 12(V) |
8 | Max. Torque | 414N.m@1500RPM |
9 | Starting type | Electric |
10 | Min. specific fuel consumption | 225(g/Kw.h) |
5.Transmission System |
(1)Torque Converter |
1 | Model | CARRARO |
2 | Cooling type | Pressure oil circulating |
(2),Transmission case |
1 | Model | CARRARO |
2 | Type | Synchromesh mechanical shift |
3 | Gear shift position | 4 Forward and 4 reverse gears |
(3),Axle and Tire |
1 | Model | CARRARO |
2 | Type of main reducer | spiral bevel gear, single stage |
3 | Type of final reducer | Single stage planetary |
4 | Max. steering angle | 550 |
5 | Grade ability | 30% |
6 | Max. drawing force | 70±10%(kN)for 4WD |
7 | Tire type | 4WD fore tire12-16.5NHS- 10PR (air pressure 4.4) |
Rear tire 19.5L-24R4-12PR(air pressure 2.4) |
6.Working Device Hydraulic System |
1 | Model of oil pump | HP330B478BIAC12-98-KHAC07-1 (CHINA NINGBO HERCURES) |
2 | System pressure | 230(kgf/cm2) |
3 | Model of loading valve | HC-D16/3/60090333ES (ITALY HYDROCONTROL) |
4 | Model of priority valve | 152B2238 (DANFSS) |
5 | Model of digging valve | HC-D16/7/60120753IN (ITALY HYDROCONTROL) |
6 | Priority pressure | 3 Mpa |
7.Steering System |
1 | Type | Fore wheel Steering |
2 | Model of steering gear | 150-1219 (EATON) |
3 | System pressure | 140(kgf/cm2) |
